%%tb-image-alt-text%%
  • No. 1241
  • 11,8 m 3,0 m 5,5 m
  • 15,3 x 6,0 m
  • from 5 to 14
  • 3,0 m
  • 1,0 m
  • necessary access for heavy construction machines
  • the equipment has a certificate in accordance with the standard, issued by the competent certification body

DESCRIPTION

EXCAVATOR is a steel-rope device designed in the shape of a construction backhoe loader. The device is kept in a yellow and black colour scheme with red inserts.
The core of the steel structure consists of 120x120mm square tubes supplemented by 100x100m and 100x50mm sections. Structure protected against corrosion by hot-dip galvanising. A rope net, hanging on hot-dip galvanised turnbuckles for tension adjustment, is installed to the steel structure.
The net consists of:
– a 1x1m rope shaft installed in the centre of the device
– 4 rope and 2 rubber mat platforms with dimensions of 1×0.5m positioned alternately inside the rope shaft. The platforms allow easy communication inside the device
– 2 rope levels at heights of 1.5m and 3.5m
– 2 rope ladders and 4 climbing ropes leading from level zero to the first floor
– 2 rubber mat platforms with dimensions of 0.5×0.4m and 2 rope trusses measuring 1.5×1.0m installed between levels
– a large rope lounger with dimensions of 2.2×1.0m and 2 rubber hammocks with dimensions of 1.0×0.5m installed at the top of the device,
– 2 rope trusses leading from the second level to the rope lounger
An additional attraction of the device are the external additions:
– climbing rope truss 1m wide and 5m long located at the rear of the device to simulate a digging bucket. The net provides access directly to the first level of play
– rope bridge with a dense floor (mesh no larger than 120x120mm) leading to a 1m-wide slide made entirely of stainless steel. Starting section of the slide at a height of 1.5m
– 2 ladders located on the sides of the device, leading to the first level of play
Decorative elements made of HPL board for external use and 10mm thick. Glazing of the upper part made of transparent polycarbonate with a thickness of 10mm. The rope elements are made of polyamide ropes, braided, bonded with a diameter of 18mm, connected with connectors made of aluminium, stainless steel and plastics. The connection of the rope net to the steel structure is provided by means of stainless steel eyebolts. The foundation of the steel structure is made as reinforced concrete footings.
The fall area of the equipment should be made on a surface in accordance with PN EN 1176- 1:2017. The possibility of access by heavy construction equipment is required for the installation.

DOWNLOADS